Did you know that good quality swimwear can last up to 10 years? Between salt water, sunscreen oils, suntan lotions, exposure to sunlight, sweat and of course chlorine, it seems difficult for these garments to last that long, but it's not impossible, that's why in this post we will see what the most chlorine resistant swimming costumes for men look like.
It is a fact, the effects of chlorine on swimwear are many. This product, which is present in swimming pools, can cause a lot of damage over time, including stretching of the elastic, weakening of the fabric and fading of the colour.
The fabric is the factor that will determine the amount and speed of deterioration caused by constant contact with this chemical. The purpose of this post is to give you some guidance on how the fabrics are men's swimwear and how to care for these parts when in constant contact with chlorine.
Most chlorine-resistant men's swimwear materials
Chlorine can cause serious damage to fabrics. It weakens, for example, the fibres of the material, even wears them out over time and fades the colours. White swimming costumes can turn yellow. In short, swimming in a chlorinated pool is the equivalent of bleaching your swimming costume, which will always result in a weakened fabric and, over time, also in the discolouration of the fabric.
Swimming costumes are made from a variety of fabrics. It is the material, in fact, that will play an important role in the rate at which chlorine or other chemicals will affect a man's swimming costume. Mind you, it is not only the fabric itself that contributes, but also the quality.
Very often, when we buy a men's swimming costume, we trust the brand, and that's enough. Some models, however, have a shorter life than others. Nowadays, there are two materials used to make these garments that are widely used by swimmers in all swimming pools. Let's get to know them below:
– Lycra
The first type of chlorine-resistant swimming costume is made of lycra. However, it is often made up of a percentage of nylon and lycra and is rarely made entirely of lycra.
The main characteristic of this type of swimming costume is that they adapt much better to the shape of the body and are usually lighter. The prices of Lycra models are not very high, however, opting for cheap pieces means that the resistance to wear and tear will be reduced.
– PBT
When you go to a shop to buy a chlorine-resistant swimming costume, you're likely to find plenty of models made from PBT. This is a 100% polyester composite fabric and is virtually impregnable to chlorine.
It also has excellent elasticity (but less than Lycra) and is able to resist chlorinated water for a long time. On the other hand, it provides a good fit even after numerous and repeated uses. The PBT also offers excellent breathability characteristics, UV protection and dries in shorter times than other types of fabrics.
Generally, the most chlorine-resistant men's swimming costumes made of this material cost more than a lycra model. The quality of a swimming costume and your preference in choosing it, though, is not limited to the material it is made of. There are an infinite number of models that change according to the brand you choose, not to mention the colours and design that really make a difference.
Tips for removing chlorine from your swimming costume
There are a few simple ways to remove chlorine from your favourite swimming costume and extend the life of your swimsuit. Let's see what they are:
- Cold water makes a difference: Wash your swimming costume in fresh, cold water once you have finished swimming. The cold fresh water will remove the chlorine if you wash the accessory immediately. This also helps to maintain its original shape and size, while warm water will loosen the elastic causing it to stretch.
- Hand wash: You should always wash your swimwear by hand and avoid using the washing machine. Especially because it tends to be very hard on these garments, which can make you have to buy them more often. Hand washing is therefore the best and most practical way to clean and care for them.
- Use white vinegar if necessary: Instead of going out and investing in dechlorination products, you can simply mix white vinegar with cold water. This combination will remove chlorine and salt from your swimming costume, leaving it looking as good as new. Soak it in cold water mixed with ¾ cup of white vinegar for 30 minutes. Then rinse the suit in cool, fresh water and spread it out to dry.
- Remove the sunscreen from your swimming costume: Almost everyone wears sunscreen in the summer months and most of the time they wear their favourite swimming costume. If this is the case for you, dampen the sunscreen stain as soon as possible with slightly warm water. This will loosen the fabric a little. Then add a little baking soda and mild soap to the stain and rub gently. A toothbrush is an ideal tool for scrubbing because of its bristles, even if you do it gently you will notice that the stain will be removed.
Conclusions
The most chlorine-resistant swimwear for men is made of Lycra and PBT (although there are other materials such as naylon). Especially because these materials are more resistant to the effects of chlorine on the skin. clothingHowever, the care of these fabrics will also be essential to prolong the life of these pieces.
If you really want to get the best and most chlorine resistant swimwear for men, you don't need to think about what's in fashion. However, it is important that you fall in love with your swimwear and make sure you keep it to last for years to come. At Gerrysttropez you can find a variety of very chlorine-resistant models that will last a long time, as long as you follow the tips described in this post.